OEM/ODM Manufacturer Acetic Anhydride 100 - Dichloromethane – Debon

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for 0.2 M Acetic Acid , Acetic Acid Nsaids , Acetic Acid Colposcopy , If you are interested in any products, please feel free to contact us for further information or please send us email directly, we will reply you within 24 hours and the best quotation will be provided.
OEM/ODM Manufacturer Acetic Anhydride 100 - Dichloromethane – Debon Detail:

Logo

CHinese name:Dichloromethane

Number of dangerous goods:61552

English name:Dichloromethane

UN number:1593

Molecular formula:CH2Cl2

Molecular weight:84.94

CAS number:75-09-2

Physical and chemical properties

Appearance and traits

A colorless, transparent liquid with an aromatic odor.

Melting point (°C)

-96.7

Relative density(water=1)

1.33

Relative density(air=1)

2.93

Boiling point (°C)

39.8

Saturated vapor pressure(kPa)

30.55/10℃

Solubility

Slightly soluble in water, soluble in ethanol and ether.

Toxicity and health hazards

Exposure limit

 

 

Time-weighted average allowable concentration (mg/m3)

200

Short-term exposure allowable concentration (mg/m3)

300

Maximum allowable concentration (mg/m3)

/

Route of invasion

Inhalation, ingestion, percutaneous absorption.

toxicity

LD50:1600~2000mg/kg(Rat oral)

LC50:88000mg/m3,1/2小时(Rat inhalation)

Health hazard

Dichloromethane is an anesthetic that causes respiratory and circulatory central paralysis and can cause pulmonary edema. Acute poisoning: patients may have dizziness, headache, vomiting and mucous membrane irritation in the eyes and upper respiratory tract. In severe cases, bronchitis and pulmonary edema may occur, and anesthesia symptoms such as coma may occur. Chronic effects: Long-term exposure mainly includes headache, fatigue, dizziness, loss of appetite, slow movement, and sleepiness. May cause skin damage, skin defatting, dryness, scaling and chapping.

Burning explosion hazard

Flammability

Combustible

Combustion decomposition product

Carbon monoxide, carbon dioxide, hydrogen chloride, phosgene.

Flash point (°C)

/

Upper explosion limit (v%)

19

Ignition temperature (°C)

615

Lower explosion limit (v%)

12

Dangerous characteristics

In case of fire, high heat is flammable. Decomposition by heat can release highly toxic phosgene. In case of high heat, the internal pressure of the container increases, posing a risk of cracking and explosion.

 

Construction fire risk classification

c

stability

stability

polymerization hazard

can not appear

Incompatibility

Alkali metal, aluminum.

Fire fighting methods

Extinguish with water, foam, carbon dioxide, and sand.

first-aid

Skin contact: Remove contaminated clothing and rinse thoroughly with soap and water. Eye contact: Immediately lift eyelids and rinse with plenty of running water or saline. Inhalation: Remove quickly from the scene to fresh air. Give oxygen when breathing is difficult. Once breathing stops, begin CPR immediately. Seek medical attention. Ingestion: Ingestion of a large amount of warm water, induce vomiting, seek medical attention.

Leakage disposal

Evacuate the personnel in the contaminated area to a safe area, prohibit unrelated personnel from entering the contaminated area and cut off the fire source. It is recommended that emergency personnel wear self-contained breathing apparatus and wear general fire protective clothing. Stop leaks while ensuring safety. It is mixed with sand or other non-combustible adsorbent and then collected and transported to a waste disposal site for disposal. If there is a large amount of leakage, use the dike to be contained, and then collect, transfer, recycle or waste after disposal.

Storage and transportation considerations

1 Storage Precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat. Prevent sun exposure. Keep the container sealed. It should be stored separately from oxidants and acids. Can not be mixed and mixed. Lightly load and unload during handling to prevent damage to packaging and containers. Pay attention to personal protection for dispensing and handling operations. 2 Transportation precautions: Before the transmission, check whether the packaging container is complete and sealed. During transportation, ensure that the container does not leak, collapse, fall or damage. It is strictly forbidden to mix with acids, oxidants, foods and food additives. Transportation is carried out according to the prescribed route.


Product detail pictures:

OEM/ODM Manufacturer Acetic Anhydride 100 -
 Dichloromethane – Debon detail pictures


Related Product Guide:

We intention to see quality disfigurement within the creation and supply the ideal support to domestic and overseas buyers wholeheartedly for OEM/ODM Manufacturer Acetic Anhydride 100 - Dichloromethane – Debon , The product will supply to all over the world, such as: Brunei , Tunisia , Bolivia , We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.
  • We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
    5 Stars By Chris Fountas from Serbia - 2018.06.28 19:27
    It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
    5 Stars By Lesley from Lithuania - 2018.12.28 15:18
    Write your message here and send it to us