China Manufacturing Companies for Acetic Anhydride Production - Xylene structure mixture – Debon factory and manufacturers

Manufacturing Companies for Acetic Anhydride Production - Xylene structure mixture – Debon

Short Description:

Product Detail

Product Tags

Feedback (2)

During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Acetic Anhydride Urea , Dichloromethane Pla , Acetic Acid 90 Sds , We are going to provide most effective quality, quite possibly the most current market aggressive rate, for each and every new and outdated consumers with the most great environmentally friendly solutions.

Manufacturing Companies for Acetic Anhydride Production - Xylene structure mixture – Debon Detail:

Identification

English name

Xylene

Molecular formula；C8H10

Molecular weight：106.17

Dangerous goods number

33535

UN number

1307

IMDG rule page number

3292

CAS number

95-47-6

Physical and chemical properties

Appearance and traits

A colorless, transparent liquid with a toluene-like odor.

Melting point °C

-25.5

Relative density (air = 1)

3.66

Boiling point °C

144.4

Critical temperature °C

357.2

Relative density (water = 1)

0.88

Critical pressure MPa

3.70

Saturated vapor pressure KPa

1.33(32℃)

Combustion heat Kj/mol

4563.3

Minimum ignition energy mJ

——

Solubility

It is insoluble in water and can be miscible in most organic solvents such as ethanol, ether and chloroform.

Toxicity and hazards

Exposure limit

China MAC: 100mg/m3

Route of invasion

Soviet MAC: 50mg/m3

Health hazard

US TWA: OSHA 100ppm, 434mg/m3; ACGIH 100ppm, 434mg/m3

Burning explosion hazard

Flammable

flash point °C

Auto-ignition temperature °C

463

Explosion limit %

Lower limit 1.0, upper limit 7.0

Dangerous characteristics

Its steam forms an explosive mixture with air, causing a fire and explosion in case of open fire and high heat. It can react with oxidants. Its steam is heavier than air, can spread to a relatively distant place at a lower place, and ignites in case of fire. In case of high heat, the internal pressure of the container increases, posing a risk of cracking and explosion. The flow rate is too fast, and it is easy to generate and accumulate static electricity.

Combustion decomposition product

Carbon monoxide, carbon dioxide.

Polymerization hazard

Can’t appear

Stability

stable

Incompatibility

Strong oxidants

Fire fighting methods

Foam, carbon dioxide, dry powder, sand, fire extinguishing is not effective.

Storage and transportation considerations

Store in a low-temperature ventilated place, away from fire and heat. Avoid co-preservation and transportation with oxidants. It is forbidden to use tools that are prone to sparks.

package

Packaging classification

Packaging mark

Carbon monoxide, carbon dioxide.

first-aid

Skin contact: Remove contaminated clothing and wash skin thoroughly with soap and water.

Leakage emergency treatment

Eye contact: Lift eyelids and rinse with running water. Seek medical attention.

Product detail pictures:

Related Product Guide:

High-quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is constantly observed and pursued by our business for Manufacturing Companies for Acetic Anhydride Production - Xylene structure mixture – Debon , The product will supply to all over the world, such as: Haiti , Atlanta , United Arab Emirates , Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !

0.5 M Acetic Acid