China Manufacturer of Acetic Acid Reacting With Naoh - Nitric acid – Debon factory and manufacturers

Manufacturer of Acetic Acid Reacting With Naoh - Nitric acid – Debon

Short Description:

Product Detail

Product Tags

Feedback (2)

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Acetic Acid Un Number , Acetic Anhydride Nfpa , Dichloromethane Vwr , It can be our wonderful honor to meet your requires.We sincerely hope we can cooperate along with you inside the around long term.

Manufacturer of Acetic Acid Reacting With Naoh - Nitric acid – Debon Detail:

Physicochemical properties and hazardous properties of nitric acid

logo	Chinese name：Nitric acid							Dangerous Goods Code: 81002
	English name ：Nitric acid							UN number: 2031
	Molecular formula: HNO3			Molecular weight：63.01				CAS number：7697-37-2
Physical and chemical properties	Appearance and traits	The pure product is a colorless transparent fuming liquid with a sour taste.
	Melting point (°C)	-42	Relative density (water = 1)				1.5	Relative density (air = 1))			2.17
	Boiling point (°C)	86	Saturated vapor pressure (kPa)					4.4/20℃
	Solubility	Miscible with water.
Toxicity and health hazards	Route of invasion	Inhalation, ingestion, percutaneous absorption
	toxicity	LD50: LC50:
	Health hazard	Its vapor has a stimulating effect, causing irritation of the mucous membranes and upper respiratory tract. Such as tears, throat irritation, cough, accompanied by headache, dizziness, chest tightness and so on. Prolonged contact can cause tooth decay and skin contact can cause burns. Oral nitric acid causes severe pain in the upper digestive tract, burns and ulcers; in severe cases, there may be gastric perforation, peritonitis, throat, kidney damage, shock and even suffocation.
	First aid method	Skin contact: Rinse immediately with water for at least 15 minutes. Or rinse with 2% sodium bicarbonate solution. Get medical attention if you have a burn. Eye contact: Immediately lift eyelids and rinse with running water or saline for at least 15 minutes. Seek medical attention. Inhalation: Remove quickly from the scene to fresh air. Give oxygen when breathing is difficult. A 2-4% sodium bicarbonate solution was administered for nebulization. Seek medical attention. Ingestion: Ingestion of milk, egg white, vegetable oil, etc., can not induce vomiting. Seek medical attention immediately.
Burning explosion hazard	Flammability	Not burning			Combustion decomposition product				Nitric oxide
	Flash point (°C)	/			Upper explosion limit (v%)				/
	Ignition temperature (°C)	/			Lower explosion limit (v%)				/
	Dangerous characteristics	Strong oxidants. It can react violently with various substances such as metal powder, calcium carbide, hydrogen sulfide, turpentine, etc., and even explode. Contact with reducing agents, combustibles such as sugar, cellulose, wood chips, cotton, straw or waste yarn ends, causing burning and emitting highly toxic brown smoke. It is highly corrosive.
	Construction fire risk classification	b			stability	stability			polymerization hazard	not polymerization
	Incompatibility	Reducing agents, alkalis, alcohols, alkali metals, copper, amines.
	Storage and transportation conditions	Storage and transportation conditions: Store in a cool, dry, ventilated place. It should be stored separately from flammable, combustible materials, alkalis, metal powders, etc. Can not be mixed and mixed. Lightly load and unload during handling to prevent damage to packaging and containers. Pay attention to personal protection for dispensing and handling operations. Transport according to the prescribed route, do not stay in residential areas and densely populated areas. Leakage treatment: Rapid evacuation of personnel from the contaminated area to the safe area, isolation and strict restrictions on access. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus and wear acid and alkali protective overalls. Enter the scene from the upper wind. Cut off the source of the leak as much as possible. Prevent entry into restricted spaces such as sewers and flood drains. Do not touch the spill directly. Do not allow the spill to come into contact with combustible materials (wood, paper, oil, etc.) and prevent leaks while ensuring safety. Water spray can reduce evaporation but do not allow water to enter the storage container. Small amount of leakage: Sprinkle the ground with soda ash, then rinse with plenty of water, dilute the washing water and put it into the wastewater system. A large number of leaks: building a dike or digging a pit. Spray water cools and dilutes the steam, protects the site personnel, and dilutes the spill into incombustibles. Transfer to a tank truck or special collector with a pump, recycle or transport to a waste disposal site for disposal.
	And leak handling	Extinguish with carbon dioxide, sand, misty water, and extinguishing media available around the fire.