Bottom price Acetic Acid 20 Sds - Trichloromethane – Debon

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Acetic Acid Mass , 2 Acetic Acid Ph , Acetic Acid 60.05g/Mol , Our final target is "To consider the most effective, To be the Best". Please experience cost-free to call with us if you have any prerequisites.
Bottom price Acetic Acid 20 Sds - Trichloromethane – Debon Detail:

Logo

CHinese name:Trichloromethane

Dangerous goods number:61553

English name:Trichloromethane;Chloroform

UN number:1888

Molecular formula:CHCl3

Molecular weight:119.39

CAS number:67-66-3

Physical and chemical properties

Appearance and traits

A colorless, transparent, heavy liquid that is highly volatile and has a distinctive odor.

Melting point (°C)

-63.5

Relative density(water=1)

1.50

Relative density(air=1)

13.33(10.4℃)

 

Boiling point (°C)

61.3

Saturated vapor pressure(kPa)

30.55/10℃

Solubility

Slightly soluble in water, soluble in ethanol and ether.

Toxicity and health hazards

Exposure limit

 

 

Time-weighted average allowable concentration (mg/m3)

200

Short-term exposure allowable concentration (mg/m3)

300

Maximum allowable concentration (mg/m3)

/

Route of invasion

Inhalation, ingestion, percutaneous absorption.

toxicity

LD50:908mg/kg(Rat oral)

LC50:47702mg/m3,4hours (Rat inhalation)

Health hazard

Dichloromethane is an anesthetic that causes respiratory and circulatory central paralysis and can cause pulmonary edema. Acute poisoning: patients may have dizziness, headache, vomiting and mucous membrane irritation in the eyes and upper respiratory tract. In severe cases, bronchitis and pulmonary edema may occur, and anesthesia symptoms such as coma may occur. Chronic effects: Long-term exposure mainly includes headache, fatigue, dizziness, loss of appetite, slow movement, and sleepiness. May cause skin damage, skin defatting, dryness, scaling and chapping.

Burning explosion hazard

Flammability

Nonflammable

Combustion decomposition product

Hydrogen chloride

Phosgene

Flash point (°C)

/

Upper explosion limit (v%)

/

Ignition temperature (°C)

/

Lower explosion limit (v%)

/

Dangerous characteristics

In case of fire, high heat is flammable. Decomposition by heat can release highly toxic phosgene. In case of high heat, the internal pressure of the container increases, posing a risk of cracking and explosion.

 

Construction fire risk classification

e

stability

stability

polymerization hazard

No aggregation

Incompatibility

Alkali

aluminum

Fire fighting methods

Extinguish with water, foam, carbon dioxide, and sand.

first-aid

Skin contact: Remove contaminated clothing and rinse thoroughly with soap and water. Eye contact: Immediately lift eyelids and rinse with plenty of running water or saline. Inhalation: Remove quickly from the scene to fresh air. Give oxygen when breathing is difficult. Once breathing stops, begin CPR immediately. Seek medical attention. Ingestion: Ingestion of a large amount of warm water, induce vomiting, seek medical attention.

Leakage disposal

Evacuate the personnel in the contaminated area to a safe area, prohibit unrelated personnel from entering the contaminated area and cut off the fire source. It is recommended that emergency personnel wear self-contained breathing apparatus and wear general fire protective clothing. Stop leaks while ensuring safety. It is mixed with sand or other non-combustible adsorbent and then collected and transported to a waste disposal site for disposal. If there is a large amount of leakage, use the dike to be contained, and then collect, transfer, recycle or waste after disposal.

Storage and transportation considerations

1 Storage Precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat. Prevent sun exposure. Keep the container sealed. It should be stored separately from oxidants and acids. Can not be mixed and mixed. Lightly load and unload during handling to prevent damage to packaging and containers. Pay attention to personal protection for dispensing and handling operations. 2 Transportation precautions: Before the transmission, check whether the packaging container is complete and sealed. During transportation, ensure that the container does not leak, collapse, fall or damage. It is strictly forbidden to mix with acids, oxidants, foods and food additives. Transportation is carried out according to the prescribed route.


Product detail pictures:

Bottom price Acetic Acid 20 Sds -
 Trichloromethane – Debon detail pictures


Related Product Guide:

We emphasize development and introduce new products into the market every year for Bottom price Acetic Acid 20 Sds - Trichloromethane – Debon , The product will supply to all over the world, such as: Kuala Lumpur , Senegal , venezuela , We take measure at any price to attain essentially the most up-to-date gear and procedures. The packing of nominated brand is our a further distinguishing feature. The solutions to assure years of trouble-free service has attracted a great deal customers. The goods are obtainable in improved designs and richer variety, they're produced scientifically of purely raw supplies. It accessible in a variety of designs and specifications for the selection. The newest forms are much far better than the previous one and they're extremely popular with several clients.
  • High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Laura from Chile - 2018.07.12 12:19
    The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
    5 Stars By Ingrid from Gabon - 2017.03.28 12:22
    Write your message here and send it to us