2019 New Style Chloroacetic Acid For Warts - Trichloromethane – Debon

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, believe in the 1st and management the advanced" for Acetic Acid Powder , Acetic Acid 100 , Dichloromethane Ebay , Are you still seeking for a excellent merchandise that is in accordance together with your fantastic firm image while expanding your solution range? Try our excellent products. Your choice will prove to become intelligent!
2019 New Style Chloroacetic Acid For Warts - Trichloromethane – Debon Detail:

Logo

CHinese name:Trichloromethane

Dangerous goods number:61553

English name:Trichloromethane;Chloroform

UN number:1888

Molecular formula:CHCl3

Molecular weight:119.39

CAS number:67-66-3

Physical and chemical properties

Appearance and traits

A colorless, transparent, heavy liquid that is highly volatile and has a distinctive odor.

Melting point (°C)

-63.5

Relative density(water=1)

1.50

Relative density(air=1)

13.33(10.4℃)

 

Boiling point (°C)

61.3

Saturated vapor pressure(kPa)

30.55/10℃

Solubility

Slightly soluble in water, soluble in ethanol and ether.

Toxicity and health hazards

Exposure limit

 

 

Time-weighted average allowable concentration (mg/m3)

200

Short-term exposure allowable concentration (mg/m3)

300

Maximum allowable concentration (mg/m3)

/

Route of invasion

Inhalation, ingestion, percutaneous absorption.

toxicity

LD50:908mg/kg(Rat oral)

LC50:47702mg/m3,4hours (Rat inhalation)

Health hazard

Dichloromethane is an anesthetic that causes respiratory and circulatory central paralysis and can cause pulmonary edema. Acute poisoning: patients may have dizziness, headache, vomiting and mucous membrane irritation in the eyes and upper respiratory tract. In severe cases, bronchitis and pulmonary edema may occur, and anesthesia symptoms such as coma may occur. Chronic effects: Long-term exposure mainly includes headache, fatigue, dizziness, loss of appetite, slow movement, and sleepiness. May cause skin damage, skin defatting, dryness, scaling and chapping.

Burning explosion hazard

Flammability

Nonflammable

Combustion decomposition product

Hydrogen chloride

Phosgene

Flash point (°C)

/

Upper explosion limit (v%)

/

Ignition temperature (°C)

/

Lower explosion limit (v%)

/

Dangerous characteristics

In case of fire, high heat is flammable. Decomposition by heat can release highly toxic phosgene. In case of high heat, the internal pressure of the container increases, posing a risk of cracking and explosion.

 

Construction fire risk classification

e

stability

stability

polymerization hazard

No aggregation

Incompatibility

Alkali

aluminum

Fire fighting methods

Extinguish with water, foam, carbon dioxide, and sand.

first-aid

Skin contact: Remove contaminated clothing and rinse thoroughly with soap and water. Eye contact: Immediately lift eyelids and rinse with plenty of running water or saline. Inhalation: Remove quickly from the scene to fresh air. Give oxygen when breathing is difficult. Once breathing stops, begin CPR immediately. Seek medical attention. Ingestion: Ingestion of a large amount of warm water, induce vomiting, seek medical attention.

Leakage disposal

Evacuate the personnel in the contaminated area to a safe area, prohibit unrelated personnel from entering the contaminated area and cut off the fire source. It is recommended that emergency personnel wear self-contained breathing apparatus and wear general fire protective clothing. Stop leaks while ensuring safety. It is mixed with sand or other non-combustible adsorbent and then collected and transported to a waste disposal site for disposal. If there is a large amount of leakage, use the dike to be contained, and then collect, transfer, recycle or waste after disposal.

Storage and transportation considerations

1 Storage Precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat. Prevent sun exposure. Keep the container sealed. It should be stored separately from oxidants and acids. Can not be mixed and mixed. Lightly load and unload during handling to prevent damage to packaging and containers. Pay attention to personal protection for dispensing and handling operations. 2 Transportation precautions: Before the transmission, check whether the packaging container is complete and sealed. During transportation, ensure that the container does not leak, collapse, fall or damage. It is strictly forbidden to mix with acids, oxidants, foods and food additives. Transportation is carried out according to the prescribed route.


Product detail pictures:

2019 New Style Chloroacetic Acid For Warts -
 Trichloromethane – Debon detail pictures


Related Product Guide:

Every single member from our large efficiency profits team values customers' requirements and organization communication for 2019 New Style Chloroacetic Acid For Warts - Trichloromethane – Debon , The product will supply to all over the world, such as: Stuttgart , Burundi , Kazakhstan , We strive for excellence, constant improvement and innovation, is committed to make us the "customer trust" and the "first choice of engineering machinery accessories brand" suppliers. Choose us, sharing a win-win situation!
  • This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Helen from Muscat - 2017.08.16 13:39
    Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Paula from Gabon - 2018.12.30 10:21
    Write your message here and send it to us