18 Years Factory Acetic Anhydride Formula - Methyl acetate – Debon
18 Years Factory Acetic Anhydride Formula - Methyl acetate – Debon Detail:
|
Table of physical and chemical properties and dangerous properties of methyl acetate |
|||||||||||||||||||||
| Substance name | Methyl acetate | Molecular formula | C3H6O2 | ||||||||||||||||||
| Dangerous Goods Number | 33627 | Classification and Marking | Flash point flammable liquid in category 3.2 | ||||||||||||||||||
| Physicochemical properties | |||||||||||||||||||||
|
Boiling point (°C) |
57.8 |
Relative density (water = 1) |
0.92 | ||||||||||||||||||
|
Saturated vapor pressure (kPa) |
13.33(9.4℃) |
Melting point (°C) |
-98.7 | ||||||||||||||||||
|
Vapor density (air = 1) |
2.55 |
Solubility |
Slightly soluble in water, soluble in most organic solvents such as ethanol and ether. | ||||||||||||||||||
|
Appearance and traits |
A colorless, transparent liquid with a fragrance. |
||||||||||||||||||||
|
The main purpose |
Used as a solvent, flavor, artificial leather, reagents, etc. |
||||||||||||||||||||
| Fire and explosion hazard data |
This product is flammable and irritating. |
||||||||||||||||||||
|
Flash point (°C) |
-10 | Explosion limit % | 3.1～16.0 | Ignition temperature (°C) | 454 | ||||||||||||||||
|
Extinguishing agent |
Mist water, anti-solvent foam, dry powder, carbon dioxide, sand. | ||||||||||||||||||||
|
Fire fighting methods |
Move the container from the fire to the open space as much as possible. Spray water to keep the fire container cool until the end of the fire. | ||||||||||||||||||||
|
Dangerous characteristics |
It is flammable, and its vapor and air can form an explosive mixture. In case of fire, high heat, it will cause fire and explosion. Contact with oxidant reacts violently. Its vapor is heavier than air and can spread to a relatively distant place at a lower place. It will ignite and ignite in case of fire. | ||||||||||||||||||||
| Reactive data | |||||||||||||||||||||
|
stability |
stable |
√ |
Unstable |
|
Avoid conditions |
|
|||||||||||||||
|
Polymerization risk |
That may exist |
|
does not exist |
√ |
Avoid conditions |
|
|||||||||||||||
|
Incompatibility |
Incompatibility Strong oxidants, bases, acids. | Combustion (decomposition) products | Carbon monoxide, carbon dioxide. | ||||||||||||||||||
| Health hazard data | |||||||||||||||||||||
|
Route of invasion |
Inhalation | √ | skin |
|
口 | √ | |||||||||||||||
|
Acute toxicity |
LD50 | 5450 mg/kg(Rat oral)；3700 mg/kg(Rabbit oral) | LC50 | No data | |||||||||||||||||
| Health hazard: anesthetic and irritating effects. Contact with this product vapor causes eye burning, tearing, progressive dyspnea, headache, dizziness, palpitations, depression, central nervous system depression. Methanol produced by its decomposition can cause vision loss, optic atrophy and the like. | |||||||||||||||||||||
| Emergency handling of spills: Rapid evacuation of personnel to safe areas and isolation. Cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus and wear anti-static overalls. Cut off the source of the leak as much as possible. Prevent entry into restricted spaces such as sewers and flood drains. Small amount of leakage: absorbed with activated carbon or other inert materials. A large number of leaks: building a dike or digging a pit. Cover with foam to reduce steam hazards. Transfer to a tank truck or special collector with an explosion-proof pump, recycle or transport to a waste disposal site for disposal. | |||||||||||||||||||||
| Storage and transportation precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat. The temperature of the reservoir should not exceed 30 °C. Keep the container sealed. It should be stored separately from oxidants, acids and alkalis, and should not be mixed. Explosion-proof lighting and ventilation facilities are used. It is forbidden to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with leakage emergency treatment equipment and suitable containment materials. | |||||||||||||||||||||
| Protective measures： | |||||||||||||||||||||
|
Occupation exposure limit |
MAC(mg/m3)： Not formulatedPC-TWA (mg/m3)： 200PC-STEL(mg/m3)： 500 | ||||||||||||||||||||
|
engineering control |
The production process is closed and fully ventilated. Safety showers and eyewash equipment are provided.。 | ||||||||||||||||||||
|
Respiratory protection |
Wear self-priming filter respirators when in contact with vapors. Wear an air respirator when you are rescued or evacuated. |
Body protection |
Wear anti-static overalls. |
||||||||||||||||||
|
Hand protection |
Smoking is strictly prohibited at the job site. After work, take a shower. Pay attention to personal hygiene. |
Eye protection |
Wear chemical safety glasses. |
||||||||||||||||||
|
other |
Smoking is strictly prohibited at the job site. After work, take a shower. Pay attention to personal hygiene. | ||||||||||||||||||||
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for 18 Years Factory Acetic Anhydride Formula - Methyl acetate – Debon , The product will supply to all over the world, such as: Miami , Swaziland , Algeria , Our company has already have pass the ISO standard and we are fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will be the only one can have that products. We hoping that with our good products can bring our customers a great fortune.
By Prudence
from Las Vegas
- 2018.12.25 12:43
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By EliecerJimenez
from Riyadh
- 2017.05.02 18:28
Write your message here and send it to us
